NCOS: Configuring a Capable Cradlepoint device as PoE Power Sourcing Equipment (PSE)
The AER3100 is capable of providing Power over Ethernet (POE) to connected devices on 2 ports with 802.3at or 4 ports with 802.3af. This article covers the configuration of the Power Supply Equipment (PSE) functionality of the AER3100. PSE operation is independent of port mode (LAN / WAN).
How to Maximize Wireless (WiFi) Range
This article provides suggestions to improve the Wireless (WiFi) range of a capable Cradlepoint router.
Series 3: Configuring a Capable Cradlepoint device as PoE Power Sourcing Equipment (PSE)
Configuration and Overview of Configuring a Capable Cradlepoint device to function as PoE Power Sourcing Equipment (PSE)
NCOS: NEMO/DMNR Configuration
This configuration guide shows an example setup of Cradlepoint NEMO with Verizon Wireless Dynamic Mobile Network Routing service for the purposes of providing communications over Verizon Wireless LTE Access and Mobile Private Networks between an enterprise branch office (Spoke) and a data center (Hub) connected to the Verizon Private IP MPLS/VPN network.
Using Temperature Control on Supported Cradlepoint products
This article provides information about Cradlepoint's Temperature Control functionality
NCOS: Out of Band Management
This document is intended to guide an administrator through configuring the Serial Redirector feature on Cradlepoint routers for out-of-band management.
CradleCare Paid Support Frequently Asked Questions (FAQs)
This article is intended to provide answers to some Frequently Asked Questions about Cradlepoint's Pay for Support model.
NCOS: Using Temperature Control on Supported Cradlepoint Products
Viewing and setting up alerts for temperature in a capable Series 3 Cradlepoint with NCOS 6.0 or later.
Cradlepoint Router Power Supply Information
This article describes the Input/Output levels of the wall & auto power adapters for use with Cradlepoint routers.
NCOS: How to configure WiFi as WAN on a Cradlepoint router
This article provides instructions for configuring a Series 3 Cradlepoint router, running NCOS Version 6.0 or later, to use an existing WiFi network as the internet source.