Category     

Netgear 341U Modem Support

« Go Back

Information

 
Content

Netgear 341U Modem Support

Products Supported: MBR95, MBR1200B, IBR600, IBR650, CBA750B, MBR1400, MBR1400v2, AER2100. Click here to identify your router.

Firmware Version: 5.1.0 and newer. 5.0.3 for MBR95 - for information on upgrading firmware, click here.


Quick Links

Summary

Troubleshooting

Related Articles


Summary

Support for Netgear AC341U (“NETGEAR® 341U USB Modem”) used by Sprint (USA) was originally introduced for Cradlepoint routers with Cradlepoint firmware release 4.4.2. However, on 03/12/2014, a new modem firmware version was released for the Sprint Netgear 341U. This significantly changed the way the modem interacts with Cradlepoint routers, thus breaking compatibility.

Cradlepoint router firmware release 5.1.0 restores compatibility with the Netgear 341U for the following router models:

  • AER2100
  • MBR1400v2
  • MBR1400
  • CBA750B
  • IBR600
  • IBR650
  • MBR1200B

Cradlepoint router firmware release 5.0.3 restores compatibility with the Netgear 341U for the following router models:

  • MBR95

Troubleshooting

If you are not sure how to access the administrative console of your router, click here pre-6.0 FW or here post-6.0 FW.

Verify your router and modem firmware pre-6.0 FW or router and modem firmware post-6.0 FW versions, and consult the table below to determine whether your router needs to have its firmware updated. (Note: If you are unable to locate the modem firmware version in your router's admin interface, you will have to connect the modem directly to your computer and use the Sprint software to find that information.)

341U Modem Firmware VersionRequired Cradlepoint Router Firmware VersionSupported On Cradlepoint Router Models
4.07.01.11
(released 07/19/2013)
4.4.2 or newer2100, MBR1400, CBA750B, IBR600, IBR650, MBR1200B, and MBR95
45.04.20.00
(released 03/12/2014)
5.0.3 or newer (MBR95 ONLY)
5.1.0
MBR95, 2100, MBR1400, CBA750B, IBR600, IBR650, and MBR1200B
 

If your router has a secondary internet connection, its firmware can be updated automatically. Otherwise, the firmware will need to be updated manually. Please refer to this article pre-6.0 FW or this article post-6.0 FW for instructions on updating router firmware.


Related Articles/Links


Published Date: 07/08/2015

This article not have what you need?  Not find what you were looking for?  Think this article can be improved?  Please let us know at suggestions@cradlepoint.com


 
Knowledge Home | Product