Category     

Active Standalone GPS COR IBR600LE-PWD & IBR600LP-PWD

« Go Back

Information

 
Content

Understanding the difference between Standard COR IBRs & Active Standalone GPS versions of the IBR600LE-PWD & IBR600LP-PWD

Products Supported: IBR600. Click here to identify your router.

The CradlePoint products that this article refers to are in the End of Life process, there will be no further firmware updates for any of these products.  All Knowledgebase articles related to these products have received their final update.  To view our current product line, please visit https://cradlepoint.com/products.
 


Quick Links

Summary

Configuration


Summary

This article describes the differences between Standard COR IBRs & Active Standalone GPS versions of the IBR600LE-PWD & IBR600LP-PWD.


Configuration

On standard versions of COR we support GPS and reception is received on the auxiliary (2nd) modem antenna port. Our default modem antennas don't provide great GPS reception. There is a 3rd dedicated GPS antenna port on the module inside the COR (that is used in regular versions or COR). In the PWD versions this dedicated GPS port is wired to one of the WiFi antenna ports, which is now the new dedicated GPS port. WiFi no longer uses that port so it is only running with 1 antenna which is a major issue for most GPS applications. The dedicated GPS port is powered (PWD) from COR (meaning powered at 3.3V, 100mA max). This means an active GPS antenna can be attached to the dedicated GPS port and placed on top of a vehicle providing a much stronger signal and low attenuation. Active GPS antennas are readily available in the market.


Main differences between COR PWD and COR:
  • 1x1 n WiFi instead of 2x2 n WiFi

  • Active GPS antenna port at 3.3V, 100mA max (SMA adapter included to convert WiFi port to standard SMA active GPS port)

  • The GPS function is turned on by default, where as in the standard COR the default is disabled 


 
IBR600LE-PWD & IBR600LP-PWD Setup:

 
The IBR600LE-PWD & IBR600LP-PWD ship with 3 antenna; 2 cellular and 1 WiFi, and a R-SMA to SMA adapter for connecting a GPS antenna.  It does not ship with a GPS antenna.   

IBR600LE-PWD & IBR600LP-PWD WiFi and GPS Antenna Connectors
User-added image

R-SMA to SMA Adapter
User-added image
WiFi Antenna
User-added image

IBR600LE-PWD/IBR600LP-PWD Cellular Antenna Connectors
User-added image


IBR600LE-PWD/IBR600LP-PWD Cellular Antennas
User-added image

To Install:
  1. Match the antenna to the connector.
  2. Connect the antenna and tighten by hand.
 

Published Date: 12/10/2014

This article not have what you need?  Not find what you were looking for?  Think this article can be improved?  Please let us know at suggestions@cradlepoint.com


 
Knowledge Home | Product